Could you post a photograph of how the kickstand is supposed to be attached. Specifically, on which side of the metal plate does the little metal washer belong?
5 comments
Like
5 Comments
Admin
Feb 22, 2018
https://youtu.be/djAa_p_dQJQ just adding on to this thread.
Like
ZiZZO
Feb 14, 2018
Hello Sandra
It was a pleasure speaking with you. Just to "chime-in" along with the other great advice on this post, to answer your question here on the forum:
If you are looking down at the bike, the order of installation would be: Bolt-->washer-->bike mounting plate (frame)-->kickstand. Tighten it up and you're ready to go!
Regards
Tony
Like
陳建國
Feb 14, 2018
https://www.euromini.bike/instruction-manual
page 15 on instruction manual has detail kickstand installation instruction
Like
Admin
Feb 13, 2018
Hi Sandra,
Thanks for posting in our forum, and glad we were able to help.
For any future assistance, do not hesitate to give us a call or email service@euromini.bike
Like
Sandra
Feb 13, 2018
Nevermind - I called service in Union City and got the information I need. THANK YOU SO MUCH!
https://youtu.be/djAa_p_dQJQ just adding on to this thread.
Hello Sandra
It was a pleasure speaking with you. Just to "chime-in" along with the other great advice on this post, to answer your question here on the forum:
If you are looking down at the bike, the order of installation would be: Bolt-->washer-->bike mounting plate (frame)-->kickstand. Tighten it up and you're ready to go!
Regards
Tony
https://www.euromini.bike/instruction-manual
page 15 on instruction manual has detail kickstand installation instruction
Hi Sandra,
Thanks for posting in our forum, and glad we were able to help.
For any future assistance, do not hesitate to give us a call or email service@euromini.bike
Nevermind - I called service in Union City and got the information I need. THANK YOU SO MUCH!