top of page

Installing the secondary latch of the frame lock.

Should you find the need to replace the secondary safety lock of the frame lock, following these instructions should allow you to quickly and efficiently complete the job.

Step 1: If your bike is not already partially folded, unlock the main frame lock and fold the bike halfway. (for instructions on how to fold your bike, please refer to your Owner's Manual).

Step 2: With the frame unlocked and partially folded, locate the latch retaining screw. Loosen  and remove this screw. Take care not to lose this screw.

Step 3: After the screw has been removed, slide off the damaged latch. Note the spring under the latch when the latch is removed. Do not lose this spring.

Step 4: Slide the replacement latch on. 

Step 5: With the new latch replaced, align the two halves of the disconnected frame lock and reinstall the screw. Tighten until the screw does not rotate. 

The repair is completed!

If you have any questions, please email us at or

you can call us at 1-800-346-6360

bottom of page